Skip to main content

Recycled Package Topper


Ever get tired of the same ole bows on top of those presents? Well change it up a bit with this recycled package topper. This topper can be made from the card board rolls that you have left over after you have finished your wrapping paper and they are super simple to make.

Supplies
1-card board roll (or paper towel roll)
White glue
Ribbon (long enough to fit around your package)
Scissors (I used both plain and fancy edged)
X-acto knife
Scraps of colored or scrap book paper
Compass
Ruler

  1. Take the card board roll and flatten it. Measure out eight 1.75" wide sections and cut them.

  2. Put white glue on about a half inch of the bottom of one of the card board pieces then glue it to another of the card board pieces.

  3. Continue glueing the card board sections together to form a circular star.

  4. Cut a circle out of your scrap paper that is 2.5" round. (NOTE: I used scissors that had a fancy edge but regular scissors would work fine. I also cut a second 2" circle from another color and printed out a third circle with some holiday artwork but this is not necessary. Play around with different colors, patterns and textures of paper to get a look that appeals to you). Measure the area in the center of the star where the circle will cover and place glue on the edges and glue the paper to the center of the star.

  5. Cut a 2" circle and cut 2 slits the width of your ribbon on each side. Thread the ribbon through the circle.

  6. Measure the area in the center back of the star where the circle will cover and place glue on the edges and glue the backer with the ribbon to the back of the star.

Here is the finished product:


If you like the art I used for the center of my star, here it is an a few more, Happy Holidays!

Comments

  1. Love these! I used tp and pt rolls to make ornaments for my "reuse" Christmas tree. Tip: use clothes pins to hold the pieces together while they are drying. I really love your blog, can't wait to keep reading!

    ReplyDelete

Post a Comment

Popular posts from this blog

Leather Earring Tutorial

Why should leather only be used for jackets, shoes and purses? Medium weight or upholstery leather is easy to craft since it doesn't fray or crinkle. These leather earrings are quick, versatile and easy to make. You can even recycle those old purses or jackets that have damage since you really only need small amounts of good leather. I used 4" square leather samples and had plenty left over to make more earrings. Supplies: Leather Leather punch (I bought mine at Michaels Craft store for around $10 but you can also get the from home stores like Home Depot or Lowes) Sharp scissors 2-Large Jump Rings 2-Earring wires Jewelry pliers Download the pattern below, print and cut out shapes. Cut 2-of each shape in the leather of your choice. I used 3 different types of leather, don't be afraid to mix it up. Pile one set of the three shapes on top of each other and carefully punch a whole on one of the ends. I punched the hole about a quarter of an inch away from the end using the sma

Leather Earring Pattern Update

In October I posted a tutorial to make leather earrings . Well for Christmas I revisited this craft and made a few other designs for a few people at my work. This is one of my favorite tutorials because they are so easy to make and the earrings are light and easy to wear. I liked the new designs so much I thought I would share the pattern for them. To view the full set of instructions on how to make these leather earrings, click here . To make one of the two pairs shown, download and print the updated pattern below (the bottom row are the new designs):

Washer Necklace Tutorial

Every time I buy furniture that requires assembly I always left over hardware. I take this hardware and put it in a jar thinking that one day I will need that extra nut or bolt. Well today is that day! Below is a tutorial on how to take those extra washers and make them into a cute necklace. Supplies: Scissors X-acto knife or hole punch Pencil Small piece of scrapbooking paper (you can use the left over scraps for this project) Modge Podge (or something similar) Washer Aleene’s Paper Glaze 36” of ribbon or cord Use the washer to trace a circle on the paper, don’t forget to trace the inside circle as well. Using your scissors cut just inside of the traced line on the outer circle. Note: you want to cut inside of the line and not on it so it fits on the washer and does not overlap the edges. If the hole for your center is close to the same size of a hole punch, simply punch out the center circle. If not use the X-acto knife to cut out the center area. Modge Podge the paper to the washer